1-406-862-6173
1064 Creekwood Drive
Whitefish, MT 59937
1-877-702-1992
Designers: Gwen Carreon & Jayne Flores Carreon

Gwen Carreon Designs

Follow us on Instagram and Facebook

Blog

Welcome to my Blog- First Entry

Posted on November 4, 2015 at 2:20 PM


How do you Fusible Applique? I will show you a few photos of the short process of Fusible applique done easy!



1. You will need applique scissors, a #2 Pencil (or Mechanical) Sharpy tends to disapear when heated

2. Trace onto fusible right on the line. and cut around the line giving about an 1/8 of an inch of cutting room.

3. Like this.

4. Using your Iron, Press firmly onto the traced fusible (Approx. 6-7 seconds per section) Make sure your fusible is directly on the wrong side of the fabric.

5. Once Cooled cut right on the line.

6. Like this.

7.Place all pieces in order from by number or letter or how ever your pattern directs you to.

8. At this point your almost ready to fuse it onto your pressing sheet. You can peel the paper off or look at step 9.

9. I sometimes score the paper with a needle to peel off the paper if its too hard to peel up. (this will be helpful on smaller pieces)

10. Lay your placement guide down, then your applique pressing sheet and then lay dow each piece one by one as your directed to.

11. Now press all pieces down onto pressing sheet. 

a. pressing sheet is hot be careful

b. let it cool completely until you peel it off.

c. Peel off once cool and lay it on your background fabric.

12. Press your applique on your background fabric and your ready to Quilt!


Click to view our how to video on Youtube below!!

https://www.youtube.com/watch?v=fAIr5P_kLCc" target="_blank">http://https://www.youtube.com/watch?v=fAIr5P_kLCc

Categories: None

Post a Comment

Oops!

Oops, you forgot something.

Oops!

The words you entered did not match the given text. Please try again.

0 Comments